TENS / EMS / STIM COMBO

	18-2261 Four-Channel Digital TENS/EMS COMBO Features: • Precise Intensity Control - There are 100 steps of intensity level controlled by press buttons from 1 to 100mA. • Press Button Control - The power, intensity level and parameter are controlled by press buttons, which is easy for the users to adjust the settings. All of the buttons are protected by a swing door to avoid accidental touch. • Large Liquid Crystal Display - A large LCD in 6.1 x 4.4 cm showing the intensity level, settings and treatment timer. The selected modes and parameters are readable. • Two Treatment Timers - There are two individual timers controlling the output of CH1, CH2 & CH3, CH4. This function is ideal when two patients accept treatment with the same machine. • Treatment Time Countdown - The output will shut off automatically when time is up. • Compliance Meter - The unit can store 60 sets of record of operation. Health Canada Licenced Description: Channel: Four, isolated between channels Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load each channel. Wave Form: Asymmetrical Bi-Phasic Square Pulse Voltage: 0 to 50V (Load: 500 ohm) Power source: Four 1.5V AA batteries or AC Adaptor Size: 13.8cm(L) x 7.8cm(W) x 2.8cm(H) Weight: 425 grams with battery Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step Pulse Width: Adjustable, from 50 to 300 microseconds, 10 µs/step On Time: Adjustable, 2~90 seconds , 1 Sec./ step Off Time: Adjustable, 0~90 seconds , 1 Sec./ step Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step, The "On" time will increase and decrease in the setting value. Mode: Five TENS Modes: B(Burst), N(Normal),M (Modulation), SD1 (Strength Duration), SD2 Three EMS Modes: C(Constant), S (Synchronous), A(Alternate), Burst Mode(B): Burst rate: Adjustable, 0.5 ~ 5Hz, Pulse width Adjustable from 50~300µs, Frequency fixed = 100 Hz Normal Mode(N): The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value. Modulation Mode(M): Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second.Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300µs) are fully adjustable. SD1 Mode: The SD1(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%.Total cycle time is 10 seconds. Pulse rate ( 2~150Hz) and pulse width (50~300µs) are fully adjustable. SD2 Mode: The SD2(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%.Total cycle time is 10 seconds. Pulse rate( 2~150Hz) and pulse width (50~300µs) are fully adjustable. Constant Mode (C): Constant stimulation based on setting value. Only pulse width, pulse rate and timer are adjustable in this mode. "Constant" is equal o the"Normal" mode of a TENS unit. Synchronous Mode (S): Stimulation of both channels occurs synchronously. The "ON" time including "Ramp Up" and "Ramp Down" time. Therefore, the setting of ON Time should be no less than two times of the "Ramp" time in this mode. ON TIME ?Ramp up + Ramp down Alternate Mode(A): The stimulation of the CH2 will occur after the 1st contraction of CH1 is completed. In this mode, the setting of ON Time should be no less than two times of the "Ramp" time. The OFF Time should be equal or more than the ON Time. ON TIME > Ramp up + Ramp down OFF TIME ? ON TIME Timer: Two Adjustable timers, from 1 to 60 minutes or Continuous. Adjustable in 1 minute each step from 1 to 15 minutes, and 5 minutes each step from 15 to 60 minutes. Treatment time countdown automatically. Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours. Low Battery Indicator: A low battery indicator will show up when the battery is low. Operating Condition: Temperature:0C~40C Relative Humidity: 30%~75% Atmosphere Pressure: 700Hpa~1060Hpa Remark: There may be up to a +/-5% tolerance of all parameters and +/-20% tolerance of amplitude & voltage. Included: 1 x 4-Channel Unit, 4 x AA Batteries, 4 x Leadwires, 1 x AC Adaptor, 2 x 4 pcs electrodes, Operation Manual, and Carry Case.
	18-2260 Premier Stim Plus Digital TENS/EMS Combo The Premier Stim Plus TENS/EMS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups. This unit is a combination stimulator of TENS and EMS which can be used for pain relief and muscle stimulation. The device is provided with two controllable output channels, each independent of the other. A pair of electrodes can be connected to each output channel. The intensity level and settings are controlled by press buttons. • Recommended for Home Use Only • Health Canada Licenced
	18-2250 Analog TENS Unit Channel: Dual; isolated between channels Modes of Operations: Continuous, Burst, & Modulation Pulse Intensity: Adjustable 0-80 mA peak into 500 Ω load each channel, constant current Pulse Rate: 2-150 Hz (adjustable) Pulse Width: 30 μs – 260 μs (adjustable) Timer: 30 or 60 minute, or continuous mode Burst Mode: Burst consists 2 burst per sec at 100Hz Waveform: Asymmetrical Bi-Phasic square pulse Voltage: 0-100 Volt (open current) Recommended for Home Use Only Health Canada Licenced
	18-2252 Digital Comfy TENS Unit The Comfy TENS® featured 5 stimulation modes and adjustable pulse width, pulse rate and treatment timer. Its large liquid display showing the mode name and all settings is ideal for users to check the setting in anytime Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load Wave Form: Asymmetrical Bi-Phasic Square Pulse Size: 10.1cm(L) x 6.1cm(W) x 2.45cm(H) Weight: 150 grams with battery. Pulse Rate: Adjustable, from 2 to 150 Hz, 1Hz/Step Pulse Width: Adjustable, from 50 to 300 microseconds, 10µs/step Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration), SD2 Timer: Adjustable, from 5 to 60 minutes or Continuous. Features: • Flip top cover • 5 modes of option • Protective strips on both sides of unit • Large LCD showing all settings • Easy to use press buttons control • Simple directions for use inside the cover • Patient compliance meter up to 999 hours • Storage of the last used settings • Easy to open swing cover • Unbreakable, stainless steel belt clip • Treatment time countdown • Low battery indicator • Recommended for Home Use Only • Health Canada Licenced
	18-2110 Cefar Easy TENS Unit The TENS programs in the CEFAR EASY effectively relieves both acute and chronic pain in the back and neck. The CEFAR EASY can be used anywhere - at home, at work, etc. Choose between four pre-set programs: • Pain Relief, Neck/Shoulder • Pain Relief, Lower Back • Massage, Neck/Shoulder • Massage Lower Back No. of Channels: 1 Stimulation current/channel: 0-60 mA No. of pre-set programs: 4 Stimulation forms: Continuous stimulation: modulated pulse duration, modulated frequency Pulse width: 300 µ Frequency: 80 Hz Timer: 30 Minutes Power supply: 2 pcs. 1.2 V AA rechargeable batteries or 2 pcs. 1.5 V AA non-rechargeable batteries. Size (W x H x D): 52 x 125 x 30 mm Weight: About 130 g
	17-0215 Mettler Trio*Stim™ 215 Portable The Trio*Stim is a battery-operated, neuromuscular electrical stimulator that features three therapeutic modes: TENS, Muscle Stimulation and Microcurrent. This two-channel unit allows you to provide a device for pain control with either TENS or Microcurrent stimulation or you can use the same device for muscle rehabilitation, re-education and spasm reduction. Weight: 6.5 ounces, (185g.), with the battery installed Dimensions: 4.4 in (H) X 2.7 in (W) X 1.0 in (D), (113 mm (H) x 2.71 mm (W) x 25 mm (D) Specification: Download
	18-2116 Cefar Basic Professional TENS Unit Cefar Easy Touch(™) Automatic Intensity Adjustment (unique to Cefar): At the press of a button the Intensity is automatically set and adjusted according to the result of the auto test analysis. This ensures Stimulation takes place at an optimal and effective level. 3 Tens Programs Covers all Essential Pain Relief Needs: Program 1: Conventional (High Frequency) TENS: First choice for Acute and Long Term Pain. Effective way to treat pain originating from muscles, ligaments and joints or pain from a lesion in the nervous system. Program 2: Burst (Low Frequency) TENS: Most effective for radiating projected pain in arms and legs when you have pressure on a nerve (Rhizopathy) and for conditions with reduced or changed sensitivity to touch. Program 3: Modulated Pulse Duration. High frequency stimulation where the pulse duration varies continuously. This causes an undulating sensation which may be more pleasant than conventional TeNS and is therefore a more effective treatment.
	18-2117 Cefar Primo PRO Home Use TENS Unit 2 Independent Channels: You can run 2 different treatment programs at the same time. Cefar Easy Touch(™) Automatic Intensity Adjustment (unique to Cefar): At the press of a button the Intensity is automatically set and adjusted according to the result of the auto test analysis. This ensures Stimulation takes place at an optimal and effective level. 7 Tens Programs based on latest research and proven medical experience: Program 1: Conventional (High Frequency) TeNS. First choice for Acute and Long Term Pain. Effective way to treat pain originating from muscles, ligaments and joints or pain from a lesion in the nervous system. Program 2:Burst (Low Frequency) TeNS. Most effective for radiating projected pain in arms and legs when you have pressure on a nerve (Rhizopathy) and for conditions with reduced or changed sensitivity to touch. Program 3:Modulated Pulse Duration. High frequency stimulation where the pulse duration varies continuously. This causes an undulating sensation which may be more pleasant than conventional TeNS and is therefore a more effective treatment. Program 4: Treating Sensitive Areas/Facial. This program has a shorter pulse duration for treating sensitive nerve rich areas like the Face and high on the Neck. With a shorter pulse, the intensity can be increased to the correct intensity level without the user experiencing pain. Program 5: Mixed Frequency. Stimulation frequencies switch every 3 seconds giving a combination of High and Low frequency stimulation. This can offer a more effective treatment for all conditions listed in Conventional & Burst TeNS. Program 6: Nausea. Specially designed for treating Postoperative or Chemotherapy induced Nausea. Place black lead pad on acupuncture point PC6 (inside wrist) and red wire pad on TE5 (outside wrist). Program 7: Cefar Flow TeNS. Developed by Cefar Medical. Always use 2 Channels and 4 Pads with Program 7. A modulated pulse duration stimulation is obtained, but as the channels are alternately active a massaging pumping effect is experienced. This program has been developed to treat large areas (Lower Back) to obtain pain relief together with Massage/Muscle Relaxation. The pumping effect also increases circulation in the stimulated area. Program 8, 9 & 10: Open Slots. By following instructions in User Manual you can create you own programs.
	18-2115 Cefar Rehab X2 TENS/NMES Unit With the Rehab X2 the essentials of TENS and NMES treatments are gathered in one stimulator. The CEFAR REHAB X2 has preset programs that cover a large area of indications. The TENS programs includes Mixed frequency and CEFAR FLOW TENS. The NMES set includes preset intermittent programs for both orthopaedic and neurological rehabilitation, alternating stimulation, strength programs with active rest, warm up, recovery and massage programs. CEFAR EASY TOUCH Automatic amplitude adjustment: Cefar Easy Touch helps the patient to easily find the right level of stimulation and to enhance the most effective treatment. Programming function: There are three open slots, which make it possible to create your own parameters for each individual patient. All possible variations in both continuous and intermittent stimulation can be set. CEFAR FLOW TENS: A preset program with a new comfortable way of stimulation. By using both channels (four electrodes) at the same time, you obtain pain relief together with a pleasant massaging, pumping feeling. Recommended to be used on larger areas of the body, like the back, neck, hip or shoulder area. CEFAR Clinical Guide (CCG) Extensive information regarding the most common indications is added to the User Manual. You will find guidelines and suggested programs with photos of electrode placements for the most used indications of orthopaedics, pain and neurology. Timer: There is a suggested preset treatment time for all the programs, but an option to change the timing individually up to 99 minutes. Hand Switch: The hand switch helps the patient to get an effective and individual stimulation by allowing them to manually control the time of contractions in intermittent stimulation programs. Other features: Program pause; Program lock, Compliance and Self check TECHNICAL DATA - CEFAR REHAB X2 No. channels: 2 simultaneous Stimulation current/channel: 99.5 mA No. of pre-set programs: 27 + 3 open spots for programming Stimulation forms: Conventional, Burst, Modulated frequency/pulse duration, Mixed frequency, Alternated modulated pulse duration (CEFAR Flow TENS), Intermittent Pulse width: max. 400 µs Frequency: max. 120 Hz Timer: 0-60 min Power supply 2 x 1.2 V AA rechargeable batteries Size (W x H x D) : 120 x 50 x 30mm Weight: 180 g
	18-2150 Intelect T.E.N.S Dual Channel w/ Timer: 9v, case, 2 leads, manual. Wave form: modified sq. pulse amplitude: 0-80v. pulse freq.: 2-150Hz. Pulse width: 60-250 microsec. Mode Select: Burst, Mod, Normal. Max Volt: 100. Open: 30, 60, Cont.