21-6020 Health o meter® Digital Beam Scale Model 500KL
• 500 lb (227 kg) capacity, 0.2 lb (0.1 kg) increments.
• Large, low platform with non-skid mat for stability and easy access.
• Auto-off when unit is battery-powered and user did not press any buttons within 2 minutes
• Easy-to-read, 1" high LCD readout.
• Weight is measured when user steps on the scale. After the weight has stabilized, the stable weight icon and the weight will be displayed
• User Friendly Buttons
• Battery icon will not be displayed when AC adapter is used
• Low battery indicator flashes when battery is low
• ON/OFF button to turn the scale on for weight measurement. Press the button to turn the scale off
• Start indicator:"Start" indicates the scale is starting up. After 4 to 5 seconds, 0.0 is displayed.
• Calibration indicator:"CAL" indicates that the scale is performing calibration
• Weight icon is displayed when weight is stabilized
• Overload indicator:"Over" indicates the scale is overloaded.
• Negative weight indicator:"UndEr" indicates negative weight detected and the scale will correct this error by setting it back to zero
• Hold/Release button can be pushed after the weight has stabilized to hold the weight display. Press the button again to cancel the function
• Zero button to reset display to 0.0
• BMI button to calculate body mass index.
• Up and Down buttons to adjust the input entered by a 100
• Clear button to clear incorrect input
• Enter button to confirm the input
• Height rod: 24” to 84” x 1/8” ( 60cm to 213cm x 1mm)
• Strong aluminium pillar.
• Updatable Firmware
• EMR Connectivity via USB
• 6-AA cell 1.5V batteries included. Optional AC Adaptor available (Model ADPT31 for USA-CSA only; Model ADPT30 for IEC)
• 1 year warranty